| 英文名稱 |
中文名稱 |
CAS號 |
操作 |
| Dewar flask cold trap, glass door, 500ML |
杜瓦瓶式冷阱,玻璃節門, 500mL |
|
詳細
|
| Dewar flask cold trap, PTFE valve, 250ML |
杜瓦瓶式冷阱,四氟節門, 250mL |
|
詳細
|
| Solid glass stopper, 10/30 |
實心玻璃塞,10/30 |
|
詳細
|
| Solid glass stopper, 29/42 |
實心玻璃塞,29/42 |
|
詳細
|
| Dewar flask cold trap, PTFE valve, 500ML |
杜瓦瓶式冷阱,四氟節門, 500mL |
|
詳細
|
| Round Bottom Dry Ampoule, 5ML |
圓底干燥安瓶,5mL |
|
詳細
|
| Double inclined hole PTFE door plug |
雙斜孔四氟節門塞 |
|
詳細
|
| Flat Bottom Dry Ampoule, 5ML |
平底干燥安瓶 , 5mL |
|
詳細
|
| Round Bottom Dry Ampoule, 10ML |
圓底干燥安瓶,10mL |
|
詳細
|
| Flip-top rubber plug, white natural rubber, thread-tight, 24/40 |
翻口橡膠塞，白色天然橡膠，螺紋密合式，24/40 |
|
詳細
|
| Brown O-ring, inner diameter x width 9.2 x 2.62, for S181530, hardness 70 |
棕色O型圈,內徑×寬度9.2×2.62 配S181530用 硬度70 |
|
詳細
|
| Flat Bottom Dry Ampoule, 50ML |
平底干燥安瓶,50mL |
|
詳細
|
| Round bottom dry ampoule, 100ML |
圓底干燥安瓶,100mL |
|
詳細
|
| Brown O-ring, inner diameter x width, 18.7 x 2.62 |
棕色O型圈,內徑×寬度,18.7×2.62 |
|
詳細
|
| Flat Bottom Dry Ampoule, 10ML |
平底干燥安瓶 , 10mL |
|
詳細
|
| Round Bottom Dry Ampoule, 20ML |
圓底干燥安瓶,20mL |
|
詳細
|
| Brown O-ring, inner diameter x width, 21.8 x 3.5 |
棕色O型圈,內徑×寬度,21.8×3.5 |
|
詳細
|
| Brown O-ring, inner diameter x width, 12.4 x 2.62 |
棕色O型圈,內徑×寬度,12.4×2.62 |
|
詳細
|
| Brown O-ring, inner diameter x width, 81.9 x 5.33 (for S74) |
棕色O型圈,內徑×寬度,81.9×5.33（S74用） |
|
詳細
|
| Brown O-ring, inner diameter x width, 50.4 x 3.50 (for S73) |
棕色O型圈,內徑×寬度,50.4×3.50（S73用） |
|
詳細
|
| Black O-ring, inner diameter x width, 29.7 x 3.50 (for S73) |
黑色O型圈,內徑×寬度,29.7×3.50（S73用） |
|
詳細
|
| Black O-ring, inner diameter x width, 59.9 x 3.50 (for S73) |
黑色O型圈,內徑×寬度,59.9×3.50（S73用） |
|
詳細
|
| Hollow glass stopper, 14/10 |
空心玻璃塞,14/10 |
|
詳細
|
| Solvent Transfer Dispenser |
溶劑轉移分配器 |
|
詳細
|
| Solid glass stopper, 19/22 |
實心玻璃塞,19/22 |
|
詳細
|
| Ball mill bowl clamp, 35/20, 35/25 |
球磨球碗夾,35/20, 35/25 |
|
詳細
|
| double pipe |
雙排管真空氣體分配器（球碗為35/20) |
|
詳細
|
| Single-row vacuum gas distributor (high vacuum valve) |
單排管真空氣體分配器（高真空閥） |
|
詳細
|
| Glass stopper, solid, #16 |
玻璃塞,實心,#16 |
|
詳細
|
| Hollow glass stopper, 14/20 |
空心玻璃塞,14/20 |
|
詳細
|
| Dewar flask cold trap, PTFE valve, 1000ML |
杜瓦瓶式冷阱,四氟節門, 1000mL |
|
詳細
|
| Single-row vacuum gas distributor (PTFE valve) |
單排管真空氣體分配器（四氟節門） |
|
詳細
|
| Glass stopper, hollow, #38 |
玻璃塞,空心,#38 |
|
詳細
|
| Solid glass stopper, 10/18 |
實心玻璃塞,10/18 |
|
詳細
|
| Cold trap, with #15 O-ring ground joint |
冷阱, 具#15號O型圈磨口 |
|
詳細
|
| Inner ground glass stopper |
內磨口玻璃塞 |
|
詳細
|
| Hollow glass stopper, 24/40 |
空心玻璃塞,24/40 |
|
詳細
|
| PTFE Plug |
四氟塞子 |
|
詳細
|
| Dewar flask cold trap, glass door, 250ML |
杜瓦瓶式冷阱,玻璃節門, 250mL |
|
詳細
|
| Double-row vacuum gas distributor (solid valve plug) |
雙排管真空氣體分配器（實心節門塞） |
|
詳細
|
| Flange plug |
法蘭盤塞子 |
|
詳細
|
| Flip rubber stopper |
翻口橡膠塞 |
|
詳細
|
| Hollow glass stopper (straight design) |
空心玻璃塞(直型設計) |
|
詳細
|
| Cold trap (with 15# flange interface) |
冷阱(帶15#法蘭接口) |
|
詳細
|
| Glass stopper, solid, #19 |
玻璃塞,實心,#19 |
|
詳細
|
| Hollow glass stopper, 45/50 |
空心玻璃塞,45/50 |
|
詳細
|
| Cold trap (with 35/20 ball mill mouth) |
冷阱(具35/20球磨口) |
|
詳細
|
| Glass stopper, hollow, #32 |
玻璃塞,空心,#32 |
|
詳細
|
| Flip rubber plug (thread) |
翻口橡膠塞(螺紋) |
|
詳細
|
| Hollow glass stopper, 34/45 |
空心玻璃塞,34/45 |
|
詳細
|
| Micro Dewar flask cold trap, PTFE valve |
微量杜瓦瓶式冷阱,四氟節門 |
|
詳細
|
| High vacuum valve with PTFE protection |
四氟保護的高真空節門 |
|
詳細
|
| Finely adjustable high vacuum valve with PTFE protection |
四氟保護的精細可調式高真空節門 |
|
詳細
|
| English four-jaw clamp & NBSP |
英式四爪夾 |
|
詳細
|
| PTFE straight hole joint door |
四氟直孔節門 |
|
詳細
|
| Finely adjustable PTFE straight hole valve |
精細可調式四氟直孔節門 |
|
詳細
|
| Three claw clip (small) & NBSP |
三爪夾(小) |
|
詳細
|
| Stainless steel spring and clip, 12/30 |
不銹鋼彈簧及夾子,12/30 |
|
詳細
|
| Three-jaw clamp (large) & NBSP |
三爪夾(大) |
|
詳細
|
| PTFE T-type gate |
四氟T型節門 |
|
詳細
|
| Tseng's Shui Tsui Clip & NBSP |
曾氏水咀夾 |
|
詳細
|
| Brown O-ring, inner diameter x width, 6.07 x 1.78 |
棕色O型圈,內徑×寬度,6.07×1.78 |
|
詳細
|
| Brown O-ring, inner diameter x width, 12.3 x 1.78 |
棕色O型圈,內徑×寬度,12.3×1.78 |
|
詳細
|
| Brown O-ring, inner diameter*ring thickness 5.23×2.62 (thermometer connector) |
棕色O型圈,內徑*圈粗度5.23×2.62（溫度計接頭） |
|
詳細
|
| Ground plastic clip |
磨口塑料夾 |
|
詳細
|
| Flat Bottom Dry Ampoule, 100ML |
平底干燥安瓶,100mL |
|
詳細
|
| Brown O-ring, inner diameter x width, 4.5 x 1.78 (for small threaded cap on C91) |
棕色O型圈,內徑×寬度,4.5×1.78（C91上小螺紋蓋配套用） |
|
詳細
|
| 1:5 fine adjustable PTFE door stopper |
1:5精細可調式四氟節門塞 |
|
詳細
|
| Horseshoe clamp, 80MM thickness 8MM |
馬蹄夾,80mm 厚度8mm |
|
詳細
|
| Flip Rubber Cap(NMR) &NBSP |
翻口橡膠帽(NMR) |
|
詳細
|
| Horseshoe clamp, 57MM thickness 6.5MM |
馬蹄夾,57mm 厚度6.5mm |
|
詳細
|
| Black O-ring, inner diameter x width, 10.8 x 1.78 |
黑色O型圈,內徑×寬度,10.8×1.78 |
|
詳細
|
| 1:5 straight hole PTFE door plug |
1:5直孔四氟節門塞 |
|
詳細
|
| T-type PTFE door plug |
T型四氟節門塞 |
|
詳細
|
| Ball Mill |
球磨夾 |
|
詳細
|
| Brown O-ring, inner diameter x width, 3.70 x 1.78 |
棕色O型圈,內徑×寬度,3.70×1.78 |
|
詳細
|
| Micro Dewar flask cold trap, glass door |
微量杜瓦瓶式冷阱,玻璃節門 |
|
詳細
|
| Double cold trap device |
雙冷阱裝置 |
|
詳細
|
| Cold trap with ground mouth (the trap is designed for large capacity) |
具磨口冷阱(阱體為大容量設計) |
|
詳細
|
| Integrated cold trap |
一體式冷阱 |
|
詳細
|
| Sleeve rubber stopper, flip-open |
套管式橡皮塞子,翻口 |
|
詳細
|
| Glass stopper, solid, #22 |
玻璃塞,實心,#22 |
|
詳細
|
| NA |
|
|
詳細
|
| Glass stopper, solid, #27 |
玻璃塞,實心,#27 |
|
詳細
|
| Glass stopper, solid, #13 |
玻璃塞,實心,#13 |
|
詳細
|
| Solid glass stopper, 24/40 |
實心玻璃塞,24/40 |
|
詳細
|
| PTFE standard mouth plug |
四氟標準口塞 |
|
詳細
|
| Hollow glass stopper, 29/42 |
空心玻璃塞,29/42 |
|
詳細
|
| Interchangeable 1:10 glass stoppers |
可互換的1:10玻璃塞 |
|
詳細
|
| Solid glass stopper, 14/20 |
實心玻璃塞,14/20 |
|
詳細
|
| Black O-ring, inner diameter x width, 56.5 x 5.33 |
黑色O型圈,內徑×寬度,56.5×5.33 |
|
詳細
|
| Flat Bottom Dry Ampoule, 20ML |
平底干燥安瓶,20mL |
|
詳細
|
| Black O-ring, inner diameter x width, 26.6 x 2.62 |
黑色O型圈,內徑×寬度,26.6×2.62 |
|
詳細
|
| Round Bottom Dry Ampoule, 50ML |
圓底干燥安瓶,50mL |
|
詳細
|
| single pipe |
單排管真空氣體分配器 |
|
詳細
|
| Dewar flask cold trap, glass door, 1000ML |
杜瓦瓶式冷阱,玻璃節門, 1000mL |
|
詳細
|
| Ground cold trap (split design) |
具磨口冷阱(分體式設計) |
|
詳細
|
| Cold trap with ball mill mouth (connection port is 35/20 ground mouth) |
具球磨口冷阱(連接口為35/20磨口) |
|
詳細
|
| Single-row vacuum gas distributor (glass door) |
單排管真空氣體分配器（玻璃節門） |
|
詳細
|
| Hollow glass stopper, 19/22 |
空心玻璃塞,19/22 |
|
詳細
|